Description
Tapped Performance 2015+ Stage 1.5 Hellcat Double/Triple Fuel System – the same complete, plug-and-play kit as the Stage 1, stepped up with two TI295 pumps in a Tapped triple-ready module for builds chasing four-digit horsepower on ethanol.
Why the 295?
The factory Hellcat TI285 is rated at 525 LPH – but that's free-flow; at 40 psi it's closer to 470 LPH. The TI295 delivers its full 525 LPH at 40 psi, giving you an extra margin of safety on E85 and big boost.
What's in the Kit
- Tapped triple module with (2) TI295 pumps – ships triple-ready, optional 3rd pump
- Plug & play fuel level sender connector at the hat – plugs right into the vehicle harness
- Harness from the pump assembly to the rear of the vehicle
- Tapped custom Y harness for adding a secondary FPCM, with heavy-duty 50A relay, fuse, ground and battery leads
- New Mopar FPCM (Fuel Pump Control Module)
- Optional: Fore Innovations 88mm external filter with billet brackets and stainless media, plus assembled black nylon braided hoses and fittings to intercept the factory feed line at the front of the tank
Options
- Year – 2015–2021 or 2022–2023
- External Filter – included by default; choose No to deduct $400
- 3rd Pump – add a third TI295 with PWM control (+$480)
No-Cut Install
Designed for factory-style returnless setups (fully upgradeable). Mount the secondary FPCM, unplug the factory harness from the original FPCM, plug it into the Tapped Y harness, and plug the Y harness into both FPCMs. The PCM controls both over CAN bus, just like factory. The only wires you cut are on the fuel level sender as it moves to the new module – inside the tank, so the car can go back to stock clean.
Tune It Right
More pump means more fuel to manage. N2 Speed builds custom HP Tuners remote tunes for pulley-swapped and E85 Hellcats — ask us about bundling your tune with this system.
Questions on fitment or your build? Call N2 Speed at (954) 406-8550 or email sales@n2speed.com.
