Description
Tapped Performance 2015+ Stage 1 Hellcat Double/Triple Fuel System – a complete, plug-and-play fuel upgrade for the supercharged 6.2L Hellcat, built for more boost and E85. Everything you need in one box, built around a Tapped triple-ready pump hat with two TI285 pumps installed (the same pump your Hellcat uses from the factory) and the option to add a third.
What's in the Kit
- Tapped triple pump hat with (2) TI285 pumps – ships triple-ready, optional 3rd pump
- Plug & play fuel level sender connector at the hat – plugs right into the vehicle harness
- Harness from the pump assembly to the rear of the vehicle
- Tapped custom Y harness for adding a secondary FPCM, with heavy-duty 50A relay, fuse, ground and battery leads
- New Mopar FPCM (Fuel Pump Control Module)
- Optional: Fore Innovations 88mm external filter with billet brackets and stainless media, plus assembled black nylon braided hoses and fittings to intercept the factory feed line at the front of the tank
Options
- Year – 2015–2021 or 2022–2023
- Add External Filter – included by default; choose No to deduct $400
- 3rd Pump – Triple PWM (+$460) or Boost Switch Control (+$485)
No-Cut Install
Designed for factory-style returnless setups (fully upgradeable). Mount the secondary FPCM, unplug the factory harness from the original FPCM, plug it into the Tapped Y harness, and plug the Y harness into both FPCMs. The PCM controls both over CAN bus, just like factory. The only wires you cut are on the fuel level sender as it moves to the new module – inside the tank, so the car can go back to stock clean.
Tune It Right
More pump means more fuel to manage. N2 Speed builds custom HP Tuners remote tunes for pulley-swapped and E85 Hellcats — ask us about bundling your tune with this system.
Questions on fitment or your build? Call N2 Speed at (954) 406-8550 or email sales@n2speed.com.
