Description
Tapped Performance Demon / Redeye Stage 2.0 Triple Fuel System – a complete, no-cut triple-pump setup for the SRT Demon and Hellcat Redeye, built around a Tapped triple module with three TI295 pumps for big boost and E85.
Note: Tapped Performance currently lists this system as in development/testing – call or email us to confirm lead time before ordering.
Why Three TI295s?
The TI295 holds its full 525 LPH at 40 psi, where the factory TI285 drops to roughly 470 LPH. Three of them, all PWM-controlled and running 100% of the time, give a Demon or Redeye the fuel headroom for pulley, E85 and flex-fuel builds.
What's in the Kit
- Tapped triple module with (3) TI295 pumps
- Plug & play fuel level sender connector at the hat – plugs right into the vehicle harness
- Harness from the pump assembly to the rear of the vehicle
- Pump harness jumper lead (see install notes below)
- Tapped custom Y harness for adding a third FPCM, with heavy-duty 50A relay, fuse, ground and battery leads
- New Mopar FPCM (Fuel Pump Control Module)
- Optional: external filter and intercept fittings – contact us to add
Demon / Redeye Install Notes
The Demon and Redeye already run two FPCMs from the factory. The Tapped Y harness adds the third, so all three pumps are fully PWM-controlled by the PCM. Because the factory FPCM wiring differs from a standard Hellcat, the original pump power wires are de-pinned and the included jumper lead installed so one of the kit pump harnesses plugs straight in.
No-Cut Install
Designed for factory-style returnless setups (fully upgradeable). Mount the new FPCM, unplug the factory harness from one of the factory FPCMs, plug it into the Tapped Y harness, and plug the Y harness into both FPCMs. The only wires you cut are on the fuel level sender as it moves to the new module – inside the tank, so the car can go back to stock clean.
Tune It Right
Three pumps means a lot more fuel to manage. N2 Speed builds custom HP Tuners remote tunes for Demon and Redeye builds on E85 and big pulleys — ask us about bundling your tune with this system.
Questions on fitment or your build? Call N2 Speed at (954) 406-8550 or email sales@n2speed.com.
