Description
PCM Cloning Service – GPEC3 Powertrain Control Modules
Our PCM Cloning Service transfers all critical data from your original GPEC3 Powertrain Control Module (PCM) to a replacement unit, restoring full vehicle functionality without dealer programming or security relearns.
This service is ideal for failed, water-damaged, or replacement PCMs where retaining the original vehicle configuration is required. Typical turnaround is 1–2 business days after your modules arrive.
What Is PCM Cloning?
PCM cloning duplicates the internal data from your original PCM—including vehicle-specific calibration, VIN and configuration—and writes it to a compatible replacement module. The result is a plug-and-play PCM that operates exactly like the original.
GPEC3 — What You Should Know
GPEC3 uses the MPC5674F processor with a 4MB flash file — the same hardware family as GPEC2A — and appears on later WK2 / WD and Wrangler JK platforms. Because the module stores VIN and immobilizer data, a replacement GPEC3 PCM needs the original data cloned to it to start and run correctly.
What’s Included
- Complete data transfer from your original GPEC3 PCM
- VIN, immobilizer (SKIM) and vehicle configuration retention where applicable
- Calibration and diagnostic data duplication
- Bench-level service performed with professional equipment
- Quality-checked replacement PCM ready for installation
Benefits
- No dealership programming required
- Eliminates security or VIN mismatch issues
- Faster turnaround compared to dealer replacement
- Maintains factory drivability and tuning data
- Cost-effective solution for PCM failure
Common Use Cases
- No-start or intermittent PCM failure
- Water or corrosion-damaged modules
- Replacement or used PCM installation
- Avoiding immobilizer or security relearns
Vehicle Compatibility
- Jeep, Dodge, Chrysler and RAM vehicles with GPEC3 PCM — Grand Cherokee WK2, Durango WD, Wrangler JK, 3.6L Pentastar, 5.7L HEMI, 6.4L SRT / 6.2L supercharged applications
- Compatibility is verified prior to service — send your VIN and PCM part number if unsure
How the Process Works
- Ship your original and replacement PCM to our facility
- We extract and duplicate the required data
- Data is transferred to a compatible replacement PCM
- The cloned PCM is returned, ready to install
Important Notes
- This is a service, not a physical product unless otherwise specified
- Original PCM must be readable to complete cloning
- Replacement PCM availability varies — contact us if you need us to supply one
- Vehicle compatibility confirmation required before purchase
- Custom tuned cloned PCMs should be data logged and verified after installation
Not Sure Which Controller You Have?
See our GPEC PCM Unlock Guide to identify your generation, or browse PCM / ECM / TCM Module Repair and PCM Bench Tuning services.
Ship to: N2 Speed, 1461 SW 30th Ave Bay 16, Pompano Beach, FL 33069 · (954) 998-9900 · info@n2speed.com
