Description
Fuel Injector Clinic 1200cc Injector Set — Jeep 3.6L V6 Pentastar (High-Z)
Fuel Injector Clinic (FIC) 1200cc high-impedance injector set for Jeep 3.6L V6 engines. Formerly FIC part IS232-1100H. Built for high-boost 3.6L builds; requires an injector plug change (pigtails included, or choose plug-and-play adapters).
Specs
- Set of 6 injectors (FIC part IS232-1200H)
- Flow: 1200cc/min (110 lb/hr) @ 43.5 psi (3 bar)
- Flow @ OE pressure: 130 lb/hr (1350cc/min) @ 58 psi (4 bar)
- Type: Saturated / high impedance (High-Z), Bosch-core
- Wiring: Requires an injector plug change — solder-in pigtails included, or choose the optional plug-and-play adapters (no cutting or soldering)
- O-rings: All o-rings for the factory Jeep 3.6L application included
- Warranty: FIC lifetime warranty against defects in original manufacture
Data Matched & Tuner-Friendly
Every injector is individually serial-numbered and flow-matched, with results on the included Data Match Sheet. FIC flow-tests at 43.5 psi (3 bar) and 90°F using CF-16B calibration fluid, and publishes injector characterization data for tuning — so your fuel tables are right from the first start-up.
About the Plug Change
FIC uses brand-new injectors (never remanufactured cores) for this size, so the injector plug differs from your factory harness. Solder in the included pigtails, or select the plug-and-play adapter option above to convert without cutting or soldering.
Tuning Required
Larger injectors require a tune with the new injector data. N2 Speed offers custom HP Tuners tuning for the 3.6L Pentastar — see Jeep Wrangler 3.6 Pentastar Tuning and Jeep Gladiator 3.6 Tuning.
Running an aftermarket fuel rail, intake manifold or other non-standard setup? Contact N2 Speed before ordering to confirm fitment: (954) 406-8550 or sales@n2speed.com.
