Cadillac CTS-V Gen 1 5.7L LS6 & 6.0L LS2 Tuning
Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 Remote Custom Tuning with HP Tuners
N2 Speed builds custom HP Tuners calibrations for the Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 and its 5.7L LS6 / 6.0L LS2 V8 — remotely, so your Cadillac never has to sit on someone else's dyno for a week. Every file is written for your specific combination of modifications, fuel and driving use. We do not resell generic canned maps.
Tuning is handled by email and data log review: you send us your stock file and vehicle details, we build the calibration, you flash it with your HP Tuners interface, then we refine it from your logs until the car is exactly where it should be.
Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 Coverage
- 2004-2005 CTS-V 5.7 LS6 — 400 hp, Tremec T56 6-speed manual
- 2006-2007 CTS-V 6.0 LS2 — 400 hp, LS2 short block with the LS6 rev range
- Manual only — no transmission module to license
- All years — unlocked ECM, flashes through OBD-II
The first-generation CTS-V was built as a manual only, so there is no transmission control module to calibrate. The ECM is unlocked and flashes straight through the OBD-II port.
What Our 5.7L LS6 / 6.0L LS2 V8 Calibration Addresses
We focus on LS6 and LS2 spark and fuel tables, MAF and speed-density blending, idle quality and closed-loop behaviour, fan and cooling thresholds, throttle mapping and rev limiter. Common supporting modifications we tune around include cold air intake, long-tube headers, cat-back exhaust, ported throttle body, camshaft and valvespring package, stroker short block, Magnuson or ProCharger supercharger, nitrous.
Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 Tuning Stages and Pricing
| Stage | Built for | Typical gains | Price |
|---|---|---|---|
| Stage 1 — Stock & Bolt-Ons | Stock vehicles and builds with minor bolt-ons — exhaust, headers, cold air intake or a ported throttle body | 15-25 hp and 20-30 lb-ft at the crank on 93 octane | $450 |
| Stage 2 — Heads, Cam & Stroker | Naturally aspirated builds running cylinder heads, a camshaft package or a stroker motor | 60-110 hp depending on the cam and cylinder head package | $550 |
| Stage 3 — Supercharged, Turbo & Nitrous | Complete builds with a supercharger or turbo kit, including a dedicated nitrous map | 120-250+ hp depending on blower or turbo choice, boost level and fuel | $650 |
Not sure which stage fits your build? Email a mod list to sales@n2speed.com or call (954) 406-8550 and we will tell you which package to buy — we would rather point you to the right one than sell you the wrong one.
HP Tuners Credits for the Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2
Total Credits Needed
Credits are how HP Tuners licenses each vehicle. They load onto your MPVI4 and are spent once, the first time the module is read. Adding transmission tuning means a second module is licensed, so the credit total goes up — the options above already include both.
- Engine Only — 2004-2007: 2 Universal Credits
Manual only. This car was never built with an automatic, so there is no transmission control module to license — engine credits are all you need.
Credit requirements are set by HP Tuners and can change with model year. If your car is not listed exactly, send your VIN to sales@n2speed.com and we will confirm before you buy anything.
What Every Tune Includes
- A custom calibration written for your 5.7L LS6 / 6.0L LS2 V8, modifications and fuel
- Optimized fuel, spark and torque management tables
- MAF and volumetric efficiency tables corrected for your airflow
- Transmission shift strategy adjustments on automatic cars
- Revisions after data log review until the vehicle runs correctly
- Optional speed limiter removal, fan threshold and drive mode adjustments
- Direct access to the tuner who wrote your file — not a ticket queue
What You Need Before You Order
- An HP Tuners interface such as the HP Tuners MPVI4 with Pro Feature Set, plus credits for your vehicle
- A Windows laptop with HP Tuners VCM Suite installed
- Your stock read (we will walk you through pulling it)
- A wideband air/fuel gauge — recommended for Stage 2, required for Stage 3
How Remote Tuning Works
- Order your stage. Pick the package that matches your build.
- Send your information. Email your VIN, mod list, fuel type and stock read to sales@n2speed.com.
- Flash the file. We email your calibration, normally within 1-2 business days.
- Log and refine. Send data logs; we revise until the LS2 is dialed in.
Revision turnaround: Revisions are done in the order they are received during business hours. Set time frames are available with notice. After-hours and weekend revisions are done when available.
GM Modules, Unlocks and Bench Work
Cadillac does not lock this vehicle's engine computer the way Stellantis locks 2015 and newer Dodge PCMs, so tuning is a straight OBD-II flash — no unlock service needed. For modules that are damaged or will not communicate we offer GM PCM bench tuning service. Send your VIN and we will confirm before you spend anything.
Frequently Asked Questions
How much does a Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 tune cost?
Our Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 HP Tuners remote tunes are $450 for Stage 1, $550 for Stage 2 and $650 for Stage 3. Pricing includes revisions after we review your data logs.
How much horsepower will a tune add to my Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2?
On 93 octane a Stage 1 calibration typically returns 15-25 hp and 20-30 lb-ft at the crank on 93 octane. Stage 2 builds see 60-110 hp depending on the cam and cylinder head package, and Stage 3 builds see 120-250+ hp depending on blower or turbo choice, boost level and fuel. Actual results depend on your modifications, fuel quality, altitude and ambient temperature.
Do I need to unlock anything before tuning?
No. Unlike 2015 and newer Dodge, Chrysler, Jeep and RAM vehicles, the Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2 ECM is not locked. You read the stock file and flash our calibration straight through the OBD-II port. If a module is damaged or will not communicate we also offer GM PCM bench tuning service.
How many HP Tuners credits do I need?
- Engine Only — 2004-2007: 2 Universal Credits
Can you tune the transmission too?
This car is manual only, so there is nothing to calibrate on the transmission side.
What equipment do I need for remote tuning?
An HP Tuners interface — we recommend the HP Tuners MPVI4 with Pro Feature Set — the credits for your vehicle, a Windows laptop with VCM Suite installed, and an internet connection. A wideband air/fuel gauge is recommended for Stage 2 and required for Stage 3. You can add the interface and credits to your order.
How long does the tuning process take?
Your first calibration is normally emailed within 1-2 business days of us receiving your vehicle information and stock file. Revisions are done in the order they are received during business hours. Set time frames are available with notice. After-hours and weekend revisions are done when available.
Can you tune a completely stock Cadillac CTS-V Gen 1 5.7L LS6 / 6.0L LS2?
Yes. A stock 5.7L LS6 / 6.0L LS2 V8 still leaves power, throttle response and transmission behaviour on the table. Stage 1 is designed exactly for stock and lightly modified vehicles.
Will a custom tune affect my factory warranty?
Modifying the factory calibration can affect powertrain warranty coverage. We recommend returning to the stock file before any dealer visit. Full terms appear on each product page.
Related Cadillac Tuning
Cadillac CTS-V Gen 2 6.2L LSA · Cadillac CTS-V Gen 3 6.2L LT4 · Cadillac CT5-V Blackwing 6.2L LT4
All Cadillac CTS-V and V-Series remote custom tuning · GM, Chevy, GMC & Cadillac remote tuning · GM PCM bench tuning
Questions about your build? Call (954) 406-8550 or email sales@n2speed.com. N2 Speed — Pompano Beach, Florida.
